TPS929120EVM: Device address problem

Hi, Aitor, 

If it is first time connected to EVM board, yes, it is address 01. Certainly, you can try different address from 00 to 07 in case the address had been changed before.  

It seems you are using CAN bus for communication, Please follow description in EVM user guide 3.1.2 Communication with CAN Transceiver for hardware setup. 

If it still doesn't work, please help share screen shot and/or video. 

Regards, 

XG

Hello,

I checked all the hardware setup and everything seems OK. I add photos to show it:

Nevertheless, the same error keeps apearing. I also tried supplying through J1 conector to see if that was the fault, but nothing changed.

As it can be seen in the picture it was incorrectly pluged. Changin that everything works.

Thanks for your help Xiaoguang1 :)