This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPSM63606: Remote Sense on Feedback

Part Number: TPSM63606

Hello,

In reading through the feedback on the TPSM63606, it states you can connect to VOUT at the desired point of regulation.  I was planning on routing the feedback resistors and cap near the device, but then was going to route a differential trace on VOUT/GND closer to the load.  Do you see any concerns with this approach?

I will have some local caps to generate a small plane near the device but my main load is a couple of inches away and wanted to provide better regulation at this point.  This part doesn't feature a true remote sense so I wanted to ask.