• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 62 subscribers
  • Views 255 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Vo of PTH08T230W

lutao wang
Prodigy 50 points
Other Parts Discussed in Thread: PTH08T230W

According to the datasheet, when the output voltage(Vo)
of PTH08T230W is set to 1.0V, the maximum input voltage is VoX11, so the maximum input voltage is 11V. But in sltu003, the input voltage is 12V. I want to know if 12V input voltage can be used on PTH08T230W to get 1.0V Vo?

  • 0
    TI__Mastermind 38230 points

    PTH08T230Wxx data sheet states at input voltages greater than(Vo x11) , the output ripple may increase ( typically 2X ) it normal output ripple when Vout is 1 V. The increased ripple is due to pulse skipping  of the PWM controller when input voltage is greater than (Vo x11) .