Hi,
Would this be the correct connection to an MCU?
I would like the regulator to be active only when VDISPON goes high.
Regards,
Denny
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
Would this be the correct connection to an MCU?
I would like the regulator to be active only when VDISPON goes high.
Regards,
Denny
Hi Denny,
I don't see concerns on this schematic. It should work.
One reminder is that when VDISPON is low and the the device is inactive, there will be around 5V Vout(from Vin supply).
Regards
Lei