The TI E2E™ design support forums will undergo maintenance from July 11 to July 13. If you need design support during this time, open a new support request with our customer support center.

  • State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 160 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LP38692-ADJ: Layout Review

Desireddy Teja Reddy
Intellectual 650 points
Part Number: LP38692-ADJ

Hi Team,

We are using the LP38692SD-ADJ/NOPB LDO part in our Layout Board file. I had attached the images of the Board file and Schematics. Please review the layout and share your feedback with us.

The PCB we are using is of 12 Layers:

IC - Place on top

Layers 2,4,9 and 11 are Ground

Enable Signal is from L3

Thanks and regards

- Teja.