• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 64 subscribers
  • Views 167 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS62903-Q1: TPS62903-Q1

Delish Thomas Mathew
Prodigy 100 points
Part Number: TPS62903-Q1

Kindly review the attached schematics.

Detaiils:3.3V-1.8V Buck with 2A output

BUCK_REVIEW26MAY2023.pdfBOM_BUCK.xlsx

  • 0
    TI__Mastermind 23110 points

    Looks good on all components but I would recommend picking the inductor with saturation current rating greater than 5.5A in case of a current limiting scenario. Same goes for the ferrite beads - want to pick 5.5A or higher rated.

    Thanks,

    Amod