BQ25570: VREF_SAMP pin connection

Leo Yang

Intellectual 2995 points

Part Number: BQ25570

Hi team,

Can VREF_SAMP connect the divided resistors? I saw the pin definition said connected to 0.01uF.

But the sector 7.3.1 gives a formula about VREF_SAMP. Should it be VOC_SAMP's formula?

Leo

over 1 year ago

0 Leo Yang over 1 year ago

TI__Intellectual 2995 points

If we want to set 0.75V MPP voltage and the Voc is 0.89V. The correct connection is using a divided resistors from Vin_DC to VOC_SAMP?

+1 Juan Ospina over 1 year ago in reply to Leo Yang

TI__Genius 12585 points

Hi Leo,

The voltage divider should be placed at VOC_SAMP biased by VIN_DC, here the reference voltage is sampled. The voltage used for reference is VREF_SAMP, which is why it is used in the formula. This voltage is stored at the VREF_SAMP pin across the connected capacitor.

Best Regards,

Juan Ospina

Power management

Power management forum

BQ25570: VREF_SAMP pin connection