Hi,
The VCC of BQ27520 is set as 2.5V internally. When measuring the rise/fall time of the I2C signals, at which voltage levels should I use?
Thanks.
Rgds
Danz
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
The VCC of BQ27520 is set as 2.5V internally. When measuring the rise/fall time of the I2C signals, at which voltage levels should I use?
Thanks.
Rgds
Danz