This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPSM8D6C24: PMBUS Address

Part Number: TPSM8D6C24


My customer has a design where the top resistor of ADRSEL_A is 1.1kOhm and the bottom is 10kOhm. Based on the datasheet, this seems like it corresponds to address 0x24h (36d). But the device responds to 0x14h (20d) instead. Are we misinterpreting the datasheet?