HI,
Could you please provide us the ASIL Compliance certifcate for LEO PMIC ICs. We are using this IC for FISKER program
PMIC Master TPS65941213RWERQ1
PMIC slave Leo- TPS65941111RWERQ1
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
HI,
Could you please provide us the ASIL Compliance certifcate for LEO PMIC ICs. We are using this IC for FISKER program
PMIC Master TPS65941213RWERQ1
PMIC slave Leo- TPS65941111RWERQ1
Hello Jahnavi,
The TPS6594 does have a certificate for ASIL compliance as it a part that helps achieve compliance (for a system) there are various safety documents that will demonstrate the Failure Mode Analysis of the device. These functional safety documents can be requested at the following link (safety document requests link here).
Best Regards,
Nicholas
HI Nicolas, I Dont have access to the site you mentioned. I need the ISO26262 certification documenr for these ICs. Kindly provide me with the same
Hello Jahnavi,
you need export approval to receive these documents, please fill out the form and we will grant you access to these documents.
If an export form doesn't show up after logging in, please do let me know, thank you!
BR,
Nicholas
Hello Jahnavi,
I'll speak to the individual involved with the approval to expedite this process, I appreciate you filling out the form.
BR,
Nicholas
Hi Nicholas,
I am looking for the ASIL compliance certificate from external Assessor for the particular part numbers
PMIC Master TPS65941213RWERQ1
PMIC slave Leo- TPS65941111RWERQ1
I couldnt find it in the secure folder . I want something like this .
Hello Jahnavi,
We do not have a 3rd party certificate for this semiconductor IC as it is not mandated in the ISO26262 standard, but we do have a independent assessor who nominated based upon ISO26262-part 2 criteria, this is assessment is reflected in the TPS6594-Q1 Functional Safety Report in the Mysecure weblink.
What is certification on the development flow by TÜV. (Certificate link here)
For details on the development flow see Chapter 3 in the TPS6594x-Q1 Functional Safety Manual in the Mysecure weblink
Note all documents in the Mysecure apply to all variants of the TPS6594XXXX (TPS65941213, TPS65941120, etc.)
BR,
Nicholas
----------------------------------------------------------------------------------------------------------------------
Looking for more help? [FAQ] List of FAQs for TPS6594-Q1, TPS6593-Q1, LP8764-Q1 PMICs
Thank you Nicholas. One additional request then. Is the Independent assessor of I3 level as expected per Part 2 Table 1 and is there any document that depicts that the independence? Could you share us that as well
Hello Jahnavi,
yes, I'll see if that is easily sharable with the public or if special requirements are needed NDA, disclosures, etc.
As the documents you requested are already behind a disclosure wall, so please have patience while I look into this matter.
BR,
Nicholas
Hello Jahnavi,
as part of the assessment process do have internal documents that attest to the independence and competency of the assessor as per ISO26262 requirements.
Unfortunately, we can not openly share these documents at this time.
BR,
Nicholas