Hi team,
Kindly review the schematic above motioned , I have used the inductor part CR32NP-150KC
Kindly share your feedback..
Thanks
Arun
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Arun,
Thanks for using the e2e forum.
I had a look at your schematic.
It looks to me like the FL2 inductor is not connected properly. In the current schematic, there cannot flow a DC current through the inductor.
The diode would need to be placed on the other side of the inductor.
We have an LM2611 evaluation board available. Please have a look at the schematic here to have a reference:
https://www.ti.com/tool/LM2611EVAL
Best regards,
Niklas