TPS2HB50-Q1: Capacitive load inrush current control

Niki Sonowal

Part Number: TPS2HB50-Q1

Hello there,

While using a capacitive load at the output of this IC it is taking a huge inrush current. The Vout slew rate seems to be fixed at 0.4 V/µs which is quite fast to control the inrush.

Is there any way to control the inrush current in a capacitive load ??

Thanks

Niki Sonowal

7 months ago

0 Shreyas Dmello 7 months ago

TI__Mastermind 32650 points

Hi Niki,

TPSxHBxx devices are immediate shutdown devices. To fill capacitors, we recommend devices that clamp current. I would propose looking at the new TPS1HC30 which is a single channel current clamping 30mOhm device.

Thanks,

Shreyas

Power management

Power management forum

TPS2HB50-Q1: Capacitive load inrush current control