• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 37 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

REF102: Device Marking Conformation Request - Mouser SO# 162877

Dan Lee
Prodigy 60 points
Part Number: REF102

Dear Tech Support Team,

The customer received part#REF102BU and informed that the top marking is not matched with the datasheet. 

The datasheet states the device marking should be "REF 102U B" but the received part showed "REF 102U K". 

I found the same case but there is no answer. Could you please help to check and advise on the correct top markings? Thanks.

https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1106522/ref102-ref102bu?tisearch=e2e-sitesearch&keymatch=REF102BU%20marking#

Best Regards,

Dan Lee