TUSB544RNQEVM: USB 3.2 to DisplayPort

Hi,

Do you have a block diagram that you could share? 

TUSB564 EVM supports USB/DP Type-C DEMUX to USB or DP. 

TUSB544 EVM supports USB/DP Type-C to USB/DP Type-C

But you are saying not use USB C, so I am looking for further clarification on your design requirement.

Thanks

David

Hi David,

Thank you for your reply. I need to connect external display (DisplayPort) with USB 3.2 from PC platform. 

Hi David,

I need EVM like TIDA-01620, instead of USB C should be USB 3.2

Thank you again. 

Hi,

If USB3.2 from PC platform is a Type-C port and that Type-C port support DisplayPort Alt mode, then you can use either TUSB564 or TUSB1064 EVM to connect to the external display as shown below.

You can also use TIDA-01620 as another possible choice by plugging it directly into the PC Type-C port.

Thanks

David 

Hi David,

Please let me know if this is correct, I can just use USB C to USB 3.0 cable or adapter?

TUSB564RNQEVM = TUSB564 and TPS65986 won't need firmware = jumpers setting is it true?

What should I do with CC pins on USB C in this case? 

Thank you,

Danny.