• State
  • Locked Locked
  • Replies 3 replies
  • Subscribers 63 subscribers
  • Views 103 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS7B86-Q1: LDO Pspice Model

Umesh Aghadate
Prodigy 590 points
Part Number: TPS7B86-Q1

Hello Team 

Our Customer Minda requested Pspice Model with PG Pin for TPS7B8650DQDDARQ1

ca you please support and share the Pspice Model 

thank you 

Best Regards

Umesh Aghadate 

  • 0
    TI__Mastermind 38195 points

    Hi Umesh,

    Our group has limited resources right now, and I cannot guarantee that we can provide the requested model within a reasonable time frame. 

    Regards,

    Nick

  • 0 in reply to Nick Butts
    TI__Prodigy 590 points

    hello Nick 

    Thank you for your reply.

    Customer want this model with PG because, they want to understand the device and PG behavior when Vout short to BAT (Vin 13.5V) 

    we know Vout short to GND condition as mention in datasheet, it will hit ICL and thermal shutdown triggered,

    can you please explain what happen in short to bat condition 

    Best Regards 

    Umesh Aghadate  

  • 0 in reply to Umesh Aghadate
    TI__Mastermind 38195 points

    Hi Umesh,

    Is the LDO off-battery so that VIN = VBAT? I can check, but I expect the PG to be pulled low once the output is forced above its set point but I don't know at what voltage it will be pulled low.

    Regards,

    Nick