Hi TI,
Can we use 47K ohm resistor for I2C addr 0x34?
On datasheet, TI recommend 47.5kOhm but I think 47Kohm can use as well.
Because it is close to 47.5K rather than 37.4K and 58K.
Best regards,
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi TI,
Can we use 47K ohm resistor for I2C addr 0x34?
On datasheet, TI recommend 47.5kOhm but I think 47Kohm can use as well.
Because it is close to 47.5K rather than 37.4K and 58K.
Best regards,
Our team will respond shortly
Hello,
Yes, a 47k can be used.
Regards,
Oscar Ambriz