• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 62 subscribers
  • Views 124 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

LP8725: DVS pin settings & toggle settling time

LP8725: Difference between PS_HOLD and EN_PWR_On Pin

Kelvin Tee
Genius 10035 points
Part Number: LP8725

Hi 

My customer likes to understand the difference between PS_HOLD vs EN_PWR_On pin.

When 7.5V is applied to the Vin and En Pwr_on, Does the En Pwr_on need to be always set to high to provide those supply Vout?

In such condition, does PS_HOLD signal is compulsory to hold the LP8725in order to remain in on state?

Rgds,
Kelvin

  • 0
    TI__Genius 10772 points

    Hi Kelvin,

    I assume based on your question, this would assume CONFIG=1.

    In this set up, PWR_ON starts the power on sequence. PS_HOLD is the power supply hold input and used to initiate the shutdown sequence.

    Thanks,
    Field