We are PWMing this (A series) device and reading the fault status asynchronous to the pwm generator. Is there a way to be able to tell the difference between short to battery, short to ground, and thermal shutdown when PWMing the device?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
We are PWMing this (A series) device and reading the fault status asynchronous to the pwm generator. Is there a way to be able to tell the difference between short to battery, short to ground, and thermal shutdown when PWMing the device?
Hello,
For the A version of the device,
For the B version of the device,
Best Regards,
Elizabeth