This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Is it possible to ZETA using LMR10510?

Other Parts Discussed in Thread: LMR10510

Hello everyone. I need ZETA DC-DC from 3,7 V to 6.4V at a current of 50mA.

LMR10510 suitable for this? According to 7V datasheets will not damage the chip, I also need 6.4 V.

  • Hi Vitalij,

    I'm not to clear about your Vin (3.7-6.4V?) and Vout (?) conditions.  The LMR10510 Vin is rated with an AbsMax of 7V, but it's operation is only guaranteed up to Vin = 5.5V.  In theory, yes it can be  operated in a ZETA topology as long as the Vin Absmax is not exceeded since the PMOS must be rated to VIN + VOUT.  The FB pin is rated to 3V, so that's another pin you need to watch out for.