This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ27520-G4 / incremental read

Other Parts Discussed in Thread: BQ27520-G4

Hi All,

Our customer evaluate bq27520-G4 and they plan to read register by using incremental read. Then can we read register through Temperature( ) to StateOfCharge( ) continuously? Please let me know if you have any concern.

Best Regards,

Sonoki / Japan Disty

  • Hello Sonoki-san,

    The customer should not have a problem doing the incremental read. We would just recommend that the host should not issue all standard commands more than two times per second. The DS talks about some of the communication details starting on p. 53 (Section 6.1 I2C Interface).

    I hope this helps.