Hello TI,
I was looking back at the specs of the TPS65140 to check the max current on VO1. There are discrepancies in the datasheet. On page 1, it says “Up to 15V / 400mA”. On page 2 in the typical application circuit, it says “Up to 15V / 350mA”. On page 15 (figure 15), it says “Up to 10V / 150mA”. There are two other examples of this as well. I understand there are details in regards to your VIN voltage.
I plan to use this with VIN = 5V and was curious if you could confirm the current on this boost converter. Figure 2 looks like my reference similiar to my circuit which shows 15V at 400mA.
I appreciate your feedback,
Jason Haedt