• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 63 subscribers
  • Views 923 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS3702-Q1 for 1.35V supply

Ryuji
Guru 20090 points
Other Parts Discussed in Thread: TPS3702-Q1

Hello,

Are there any automotive lineup of window comparator for monitoring 1.35V supply without resistance?

I found that the TPS3702-Q1 however, this device couldn't monitor 1.35V supply.

Best Regards,
Ryuji Asaka

  • 0
    TI__Mastermind 44220 points

    HI Asaka-san,

    Thank you for your inquiry.

    These are programmed and trimmed at the factory. The initial releases were for common voltages. So many other voltage options are possible. I recommend you please contact your local TI Sales or Distribution partner to discuss. I believe the minimum step size is 50mV so setting up a 1.35V rail monitor version is within the scope of the current design.

    Regards,

  • 0 in reply to JCHK
    Guru 20090 points
    Hello John san,

    Thank you for your reply.
    I will contact my local TI sales/FAE.

    Best Regards,
    Ryuji Asaka