TPS3702-Q1 for 1.35V supply

Ryuji

Guru 20090 points

Other Parts Discussed in Thread: TPS3702-Q1

Hello,

Are there any automotive lineup of window comparator for monitoring 1.35V supply without resistance?

I found that the TPS3702-Q1 however, this device couldn't monitor 1.35V supply.

Best Regards,
Ryuji Asaka

over 8 years ago

0 JCHK over 8 years ago

TI__Mastermind 44220 points

HI Asaka-san,

Thank you for your inquiry.

These are programmed and trimmed at the factory. The initial releases were for common voltages. So many other voltage options are possible. I recommend you please contact your local TI Sales or Distribution partner to discuss. I believe the minimum step size is 50mV so setting up a 1.35V rail monitor version is within the scope of the current design.

Regards,

0 Ryuji over 8 years ago in reply to JCHK

Guru 20090 points

Hello John san,

Thank you for your reply.
I will contact my local TI sales/FAE.

Best Regards,
Ryuji Asaka

Power management

Power management forum

TPS3702-Q1 for 1.35V supply