• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 61 subscribers
  • Views 693 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS2066 Enable Pins

RuggedEngie
Intellectual 375 points
Other Parts Discussed in Thread: TPS2066

The TPS2066 Enable pins (EN1 & EN2) are active high. If I want to permanently enable the outputs I would pull these pins high to 5V. In this case should I use a pull-up resistor i.e. 10kohm?