• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 544 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM5005 / About R7 value of reference schematic

Sho Ogane
Genius 5575 points
Other Parts Discussed in Thread: LM5005

Hi all

I see the referensc circuit (Figure 1) of LM5005.
You selected the R7 resistance is 10Ω/1W.

However my customer can not prepare same spec resistance.
So my customer would like to use R7 10Ω / 1/4W spec resistance.

Is it OK?

Best Regards,
Sho