Hi,
We got a question from customer about TPS61163A.
Could you help us?
[Question]
- Our customer would like to check phase margin and gain margin. Could you let us know resistor insertion point?
Best Regards,
tateo
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
We got a question from customer about TPS61163A.
Could you help us?
[Question]
- Our customer would like to check phase margin and gain margin. Could you let us know resistor insertion point?
Best Regards,
tateo
Hi Tateo,
I will need to consult with our design engineering team to make sure the information I provide is accurate. They are all out due to the holidays, I will contact them as soon as I can. Is this an urgent matter?
Best Regards,
Angelos
Thank you for your reply.
Sorry for rush, but could you give us your feedback by Jan. 11th?
Best Regards,
tateo
Hi Tateo,
I will provide the information you need before January 11.
Thanks you,
Angelos
Hi Tateo,
To measure gain and phase margin on the TPS61163A, insert a resistor between the diode (D1) and the output capacitor (C2).
Thank you for your patience.
Angelos
Thank you for your reply.
Please let me confirm one thing. How much is the recommended injection resistor value?
Best Regards,
tateo