• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 62 subscribers
  • Views 279 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM22670: LM22670 variable Vout

Joseph Giardina
Prodigy 20 points
Part Number: LM22670
Other Parts Discussed in Thread: LM10011, LM10010

Has anyone variably adjusted the Vout of the LM22670 using a programmable digital pot IC?

I was wondering if the high impedance indicated on the data sheet for the FB pin would prohibit the use of a digital pot to replace RFBB

  • 0
    TI__Mastermind 23825 points
    Hi,

    I think the high impedance on that pin is because of the input impedance of the error amplifier inside the IC. I would doubt that your digital potentiometer impedance is in that range. But in order to change output voltage normally we use LM10010 or LM10011

    Thanks