Hello,
I am looking to see if anyone has used an OMAP3530 without coupling it to a TPS65690. I realize this is a more challenging design, but would be interested to discuss this
path.
Thanks,
Patrick
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello Patrick,
There is an application note available that details how to power the OMAP35x using the TPS65073.
See link below
If SYS_OFF mode is required TPS65073 should be used. If you do not need SYS_OFF mode the TPS650731 can be used.
The application note shows how to connect the TPS65073x with OMPA35x and gives detailed information on power requirements.
Let me know if you have any further questions.
Best Regards,
Christian