TPS61261 is used in Li- system,to boost to 3.3Vout for system use.x
when test the 61261 Iq,below questions accounted:
1、When system works，using 2 multimeter to test the input and output current，while input current is 60mA and the output current is 43mA,
2、Test in static state：when system is powered in，but doesn't send data or Images（if the system works in wireless mode， power consumption is11mA; and the image Acquisition consumes 25mA）
the test result is 32mA input current while 24mA output current.
So, should i think that the chip itself consumes 8mA+? But in Datasheet，it should be 29uA。Or any suggestion about this test?
the circuit is designed according to TI datasheet，as following.