• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 62 subscribers
  • Views 407 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS53119: Vo latch to Vfb

John Lee11
Prodigy 100 points
Part Number: TPS53119

I followed the original circuit and change to my parameters but I do not know why my VOUT VFB is the same value at 600mV.  

  • 0
    TI__Guru**** 191445 points

    John,

    The VFB voltage level should always be 600 mV.  That is how the converter is designed.  The output voltage is set by your R8 and R7 voltage divider so that

    Vout =  600mV * ( 1 + R8/R7)

    Let me know if you have further questions.