• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 354 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS2085: about urn-on/Turn-off time

Tsukui Yusuke
Guru 21930 points
Part Number: TPS2085

Hi,

Could you tell me about TPS2085 turn-on/turn-off time.
The dominant parameter of the turn-on/turn-off speed is the load capacity.
Is this correct in your understanding?
Do "voltage and current condition” influence turn-on/off speed in ”ms” order?

Best Regards,
Yusuke/Japan Disty

  • 0
    TI__Genius 15730 points

    Hi Yusuke,

    If you take a look at figures 12 through 15, you can actually see how the input voltage has an effect on the timing parameters for the device. In general, the higher the output load and capacitance, the longer the turn on may take. However, the specs in the datasheet are maximum numbers that are expected across process and temperature.

    Thanks,

    Alek Kaknevicius