LMR14030: LMR14030

Ian Wang

Part Number: LMR14030
Other Parts Discussed in Thread: TPS254900-Q1, LM25141, LMR33620

Dear Sir,

My customer looking for a replacement part for LMR14030 with similar specs but higher efficiency.

The target is to have this buck converter operating at 95% or above efficiency under 12V Vin, 5V Vout, 1.5A Iout conditions.

Any type of buck converter is fine.

This part has to be able to co-work with TPS254900-Q1 USB port controller.

Could you help suggest suitable parts?

Thanks, Ian.

over 6 years ago

0 David Baba over 6 years ago

TI__Mastermind 29260 points

Hello Ian,

Assuming you need to operate at 2.2MHz, I suggest going with a controller like the LM25141. this will enable you to maximize the efficiency. if you are willing to give up some efficiency there are some synchronous buck converters with integrated FETs that will yield better efficiency than the mentioned LMR device, just not 95% at 2.2MHz.

Let me know if the requirements mentioned are set, if so, the controller is probably the best option for maximum, efficiency.

Hope this helps?

David.

0 Andy Chen over 6 years ago

TI__Mastermind 27045 points

HI Ian,

Pls try LMR33620 which has higher eff may meet your requirement.

Power management

Power management forum

LMR14030: LMR14030