Other Parts Discussed in Thread: LM76003, LM73606EVM-5V-400K
Could you tell me about LM73605 overcurrent and short-circuit protection?
Now we're competing with LT8614.
Customer is expecting a function of the following wording in LM73605/6.
"During overload or short-circuit conditions the LT8614 safely tolerates operation
with a saturated inductor through the use of a high speed peak-current mode architecture."
Customer wants to use an inductor whose rating is lower than the current limit value.
Therefore, such a function is indispensable.
Is it possible to achieve this in the LM73605/6?
Customer usage example:
Vin=19.5V,Vout=5V,Iout≒3.6A, Used Inductors in combination with LT8614 = FDSD0420-H-2R2M