Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 64 subscribers
  • Views 202 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS54526: TPS54526

Kumara Bhagavath
Prodigy 90 points
Part Number: TPS54526

Hi,

I am Using 4 nos of TPS54526 in my design. 5V is the input to all the regulators & outputs are 3.3V, 1.8V, 1.5V & 0.95V. Inductor value is given in the datasheet for output voltages from 1V to 5V. Can I use 1.5uH Inductor for 0.95V output?

Best regards,

Bhagavath