LM5032: Boost Interleaved converter current sharing

Hello Vikas,
Yes the currents are balanced in each stage if you configure the part for interleaved operation.
It can do this because the PWM drive is terminated when the current sensed reaches the voltage set by the error signal.
The error signal is common to both phases and this makes the currents in each loop the same.
Regards
John

Dear John,

As you said, in second line: "When current sensed reaches the voltage set by error signal", but here as we know current sense are separate.

Even the Error signal is same for both channels, but duty cycle may vary because of separate Current sensing. 

Both are balanced only when both current are compared to other and duty cycle is corrected with this sensing( if i am wrong here, please let me know).

If you have any other point of view, kindly share reference schematic. It will help.

Thanks for help.

Vikas Dabas

India

Hello Vikas,
If you need any more help please let me know.
I will close this post since you have reached a conclusion
Please open another post if you have other issues.

Regards
John

Dear John,
You have not provided solution i asked.
Close it if you want, it is your decision(one sided).

I still needs answer, if you are unable to provide, please let other people answer.
And if no one has solution, at least comment. so i will move forward.


Vikas Dabas
India