LM73605EVM-5V-2MHZ: Is there EVM available for 3.3V output?

saikumar natarajan

Part Number: LM73605EVM-5V-2MHZ
Other Parts Discussed in Thread: LM73605

Hi,

We are planning to use LM73605 in one of our ECU. Before planning to use, we would like to get an EVM for 3.3V output and test it in our lab.

Is it possible to get EVM for 3.3V output?

Regards,

Sai

over 5 years ago

0 Katelyn Wiggenhorn over 5 years ago

TI__Genius 11040 points

Hi Sai,

Both EVMs are set for 5V output. By changing RFBB to 43.5kOhm, you can set the output to 3.3V. The only other component change is the inductor from 2.2uH to 1.2uH. However, since the inductance is relatively close, the inductor change is not critical for initial evaluation.

Please let me know if you have any additional questions.

Best Regards,
Katelyn

0 saikumar natarajan over 5 years ago in reply to Katelyn Wiggenhorn

Prodigy 155 points

Hi Katelyn,

Thanks for the response. I should be able to change the RFBB and that should work.

Regards,
Sai

0 Katelyn Wiggenhorn over 5 years ago in reply to saikumar natarajan

TI__Genius 11040 points

Hi Sai,

Thank you for your confirmation.

Best Regards,
Katelyn

Power management

Power management forum

LM73605EVM-5V-2MHZ: Is there EVM available for 3.3V output?