• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 308 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

ADC12DJ3200QML-SP: ADC12DJ3200QML

BQ28Z610EVM-532: BQ28Z610EVM

Redwood
Expert 1060 points
Part Number: BQ28Z610EVM-532
Other Parts Discussed in Thread: BQ25892EVM-664, BQ28Z610

Hi, 

I am using bq28z610evm-532

When I open the "battery management studio "software from Texas Instrument :  it does not work with this EVM board. 

FYI ( Same software works with bq25892evm-664 without any problem through EV2300 I2C interface ) 

  • 0
    TI__Mastermind 42535 points

    Hi Redwood,

    Your device is not getting auto detected, for the bq28z610, if you bought the evm, you have v0.17 of fw. So, please use that unless you have upgraded the evm. If the evm is not getting detected, please power up the gauge on the BAT side and press the S1 switch or short 2P and PACK+.