Hello,
One of my customers is using TPS68470 on their design and are not using buck from this PMIC. Are there any termination guidelines for the pins not being used, specifically the ones highlighted below:
Thanks,
Nitish
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello,
One of my customers is using TPS68470 on their design and are not using buck from this PMIC. Are there any termination guidelines for the pins not being used, specifically the ones highlighted below:
Thanks,
Nitish
Hi Nitish,
Please refer to the following thread for your question: https://e2e.ti.com/support/power-management/f/196/t/846194
Thanks,
Gerard