Hello Team,
I am having difficulties getting SMBus to work with STM32 boards, do you have a recommended MCU for SMBus communication with the bq40z80?
Thank you,
Joe
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello Team,
I am having difficulties getting SMBus to work with STM32 boards, do you have a recommended MCU for SMBus communication with the bq40z80?
Thank you,
Joe
Hi Joseph,
I don't know of any right off. You would be better served by looking up http://www.ti.com/microcontrollers/overview.html
If we are to move to an MSP430, is there specific examples of communications with the bq40z80? or any examples of SMBus communication with a bq gauge?
Sample code would be very helpful.
We are having troubles! Thank you for all the help.
Hi Joseph
We don't have anything specifically for smbus, but see if these app notes below helps.
http://www.ti.com/lit/an/slua801/slua801.pdf
calibration_ccgain_VBcode_slva148a.pdf
3835.data flash programming and calibrating the bq20zxx family of gas guages.pdf