TPS2350: TPS2350

AKASH JAIN

Part Number: TPS2350
Other Parts Discussed in Thread: TPS23525

Hello

I have one question regarding TPS2350.

PFA schematic for the same.

My question is we have placed 10K resistor at load R25 in the schematic, can you please let us know if that is required. We are connecting another load at the output.

Regards

Akash

over 4 years ago

0 Rakesh over 4 years ago

TI__Guru* 96661 points

Hi Akash,

Thanks for reaching out.

R25 is not required.

Can you share your system specifications ? Please look at TPS23525 better replacement for TPS2350.

Best regards,

Rakesh

0 AKASH JAIN over 4 years ago in reply to Rakesh

Intellectual 620 points

Hello Rakesh

Thanks for the response.

Our requirement is -48V oring from two diff sources.

The max Power req is 40W.

Also, as our system is already developed, so do we need to replace TPS2350 with TPS23525?

Is there any issue with TPS2350?

Regards

Akash

0 Rakesh over 4 years ago in reply to AKASH JAIN

TI__Guru* 96661 points

Hi Akash,

There is no concern/issue with TPS2350. Please proceed.

Best regards, Rakesh

Power management

Power management forum

TPS2350: TPS2350