TPS55340: Isolated Continuous Conduction Mode Flyback Using the TPS55340- SLVA559– January2013

Hans Georg Wolf

Part Number: TPS55340
Other Parts Discussed in Thread: TINA-TI

In SLVA559 a circuit with a TPS55340 for an isolated flyback is presented. It seems that the circuit (Figure1. Reference Design Schematic) was drawn with TINA. Is the TINA-TI Refernce design (TSC-file) available for download?

Kind Regards

Hans

over 4 years ago

0 Yinsong Cai1 over 4 years ago

TI__Expert 7450 points

Hi Hans,

Thanks for your interest in TPS55340.

I believe it is. Please check the model in https://www.ti.com/product/TPS55340/toolssoftware

Thanks,
Yinsong

0 Hans Georg Wolf over 4 years ago in reply to Yinsong Cai1

Prodigy 70 points

Hi Yinsong,

Thank you for your quick reply. Under the link i found the TINA transient model for the TSP55340 and a reference design for a boost converter. But i am looking for the reference design in figure 1 presented in SLVA559 for an isolated flyback. Is this flyback reference design available for TINA or webench power designer?

Thanks in advance and kind regards

Hans

0 Yinsong Cai1 over 4 years ago in reply to Hans Georg Wolf

TI__Expert 7450 points

Hi Hans,

Sorry I thought you just want a model for the flyback. Right now we only have boost reference design. But the transient model is good for simulation in flyback.

Thanks,

Yinsong

0 Hans Georg Wolf over 4 years ago in reply to Yinsong Cai1

Prodigy 70 points

Hi Yinsong,

Thank you for your response. Then I will try my luck with the transient model.

Kind Regards

Hans

Power management

Power management forum

TPS55340: Isolated Continuous Conduction Mode Flyback Using the TPS55340- SLVA559– January2013