TL750M: Want to confirm TL750M05CKCSE3/TO220 package soldering condition.

Junichi Komura

Part Number: TL750M
Other Parts Discussed in Thread: LM2904,

We need mounting conditions info of TL750M/TO220 package, because there are no information at such device page but it's necessary to describe in the format of our customer request. It's better to explain flow conditions because this is a pinhole package. In the same package (LM2904) information, it's 260℃/10 seconds. Is this product the same specification? We look forward to your answer.

Thanks and best best regards,

J.Komura@Ted

over 4 years ago

0 JCHK over 4 years ago

TI__Mastermind 44460 points

Hi Komura-san,

I believe that soldering recommendations are more focussed on IR reflow or SMT packages exposed to a solder wave. See the attached for reference. Since only the leads are exposed to the solder wave, there is not a lot of impact to the device itself.

Does this help to answer your question?

0 Junichi Komura over 4 years ago

Prodigy 210 points

John -san

Thank you very much for your answer. Your information and advice are much helpful for our customer support.

Thanks again and best regards,

J.Komura@Ted

Power management

Power management forum

TL750M: Want to confirm TL750M05CKCSE3/TO220 package soldering condition.