• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 62 subscribers
  • Views 233 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TLV742P: Relation of Absolute Maximum Ratings and Vin

user6142633
Intellectual 440 points
Part Number: TLV742P

Hi, teams

Absolute maximum ratings of EN pin is -0.3 ~ 6 V, that is no dependence on Vin.

This means that is no problem applying voltage to EN pin without Vin?

In our system, above condition occurs while power-on sequence.

Best regards,

Naoki

  • 0
    TI__Mastermind 44330 points

    Hi Naoki-san,

    Yes. As long as these pins are below the absolute Maximum threshold, the device will no be damaged. If there is a constraint on the enable pin with respect to VIN, the Absolute Maximum rating table would show its maximum voltage as VIN+0.3V. 

    I hope this answers your question.