DCH010512D: DCH010512D

beesetty rajesh

Part Number: DCH010512D

Hello All,

I would like to connect a filter using a ferrite bead- capacitor combinations recommended by the TI as shown in the datasheet (pg: 13/22).

But I cant find the ferrite- bead with inductance as parameter in the digikey/mouser.

Kindly recommend part number if any.

0 Jimmy Hua over 4 years ago

Hi,

The ferrite bead part number is detailed in section 9.1.1.12 as "2773019447" for surface mount.

If you want to use an inductor instead of a ferrite bead, the recommended inductance is 1- 5uH and is up to you to decide.

Regards,

Jimmy

0 iAlejandro over 4 years ago

Hi Rajesh,

The ferrite beads we recommend in the datasheet are available for purchase in both Digi-Key and Mouser.

Fair-Rite manufactures a surface-mount and a through-hole bead.

Regards,
Alejandro

Power management forum