This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Can I select these equivalent mosfets in the TI generated design:
1. M1 CSD17303Q5 : Replace it with AO4406A
2. M2 IRF6609PBF : Replace it with NTP5860N
Both datasheet attached.
Hi Deepak Bansal1,
Thanks for reaching out with your question and for considering the LM5122 in your design.
For M1 I suggest selecting a MOSFET that has similar characteristics to CSD17303Q5. AO4406A has considerably higher RDSon and a higher gate charge. This will lower the efficiency of the regulator.
For M2 the replacement part number appears to be adequate.
Please let me know if you have any questions.
Thanks,
Garrett
Hi Garrett,
Sent you friend request. Have some design enquiry in schematic and pcb gerbers.
Can we discuss it via DM?
Deepak,
Please send me friend request and I can help with the your questions.
Thanks,
Garrett
Deepak,
I have accepted your friend request. I am going to close this thread as we will continue the conversation in a direct message.
Thanks,
Garrett