Hello E2E,
I got the BQ24735EVM-71, and I test it.
The EVM is setted ILIM=4A. I inputted 0x0200 to 0x14 register. However, charging current was 4A, the inputted number was ignored.
Please let me know the reason.
Best regards,
ACGUY
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello E2E,
I got the BQ24735EVM-71, and I test it.
The EVM is setted ILIM=4A. I inputted 0x0200 to 0x14 register. However, charging current was 4A, the inputted number was ignored.
Please let me know the reason.
Best regards,
ACGUY
Hi ACGUY,
Can you please read back all of the registers after you write ChargeCurrent() = 512 mA (0x0200)? Please send the full register dump so we can make sure that the registers have been set correctly.
Best regards,
Angelo