Hi:
I want to move bleeder circuit to the front of bridge diodes.
Does it work well?
B/R
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi gz,
No, it doesn't work, and please refer to the recommended application circuit.
BR
Sean
Hi Sean:
There are some problem with the circuit.I upload the circuit diagram again:
I think BLDR pin can still get input phase and control the bleeder current.I've tried it and It work well.
But I worry there could be problems because it is different to the recommended application circuit.
Can you provide me any advice?
Thanks!
B/R
Hi gz,
From my understanding, it looks that it can work but since this is not typical and recommended solution, you need to do more tests and verify this solution.
But I'm confused why not design it according to our recommend circuit?
BR
Sean
Hi gz,
Sure, please try and let us know the test results.
BR
Sean