Hi Team,
Unable to run the simulation at a temp of 100C - what is the issue?
Input - 3.3V
Output 1.8V / 500mA
Regards,
RJ
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Team,
Unable to run the simulation at a temp of 100C - what is the issue?
Input - 3.3V
Output 1.8V / 500mA
Regards,
RJ
Hi Ramon,
Thanks for your question.
I will look into this problem and give you feedback by Monday.
Thanks,
Stefano
All information in this correspondence and in any related correspondence is provided “as is” and “with all faults”, and is subject to TI’s Important Notice (http://www.ti.com/corp/docs/legal/important-notice.shtml).
Hi Ramon,
We found a small bug in the WEBENCH model of the device and we are working to fix it.
I'll let you know when it is solved.
Thank you for your patience,
Stefano
All information in this correspondence and in any related correspondence is provided “as is” and “with all faults”, and is subject to TI’s Important Notice (http://www.ti.com/corp/docs/legal/important-notice.shtml).
Hi Ramon,
The model has been fixed.
The changes should reflect on ti.com by end of next week.
Please ask again if you have any more questions.
Thanks,
Stefano
All information in this correspondence and in any related correspondence is provided “as is” and “with all faults”, and is subject to TI’s Important Notice (http://www.ti.com/corp/docs/legal/important-notice.shtml).