WEBENCH Tools/TPS54386: TPS54386 simulation support

Parveen Dhiman1

Part Number: TPS54386

Tool/software: WEBENCH Design Tools

Hi,

Since this thread was older, I'm curious if the part TPS54386 added in WEBENCH tool yet? Particularly, webtool didn't show up any alternate design related to IC & no option to check dual outputs.

As an alternative can I use outdated Switcher-Pro desktop to except desired results?

Regards,

Parveen

over 3 years ago

0 Vincent Zhang(BSR) over 3 years ago

TI__Expert 4795 points

Hi Parveen,

TPS54386 is not added in WEBENCH tool yet. I think you can use Pspice model to check the simulation results.

0 Zhao Ma over 3 years ago

TI__Genius 15135 points

Hi, Parveen

Don't recommend using Switcher-Pro to do the simulation.

1. You can start your design based on the EVM' schematic, EVM had been validated by many tests.

2. And there are some reference design models in below link, you can use them to do the simulations.

0 Parveen Dhiman1 over 3 years ago in reply to Vincent Zhang(BSR)

Prodigy 30 points

Thanks for quick information Vincent ,We will try it.

Regards,

Parveen

0 Parveen Dhiman1 over 3 years ago in reply to Zhao Ma

Prodigy 30 points

Hi Zhao Ma,

Thanks for recommendations & detailed reference reports. We already have one board up & running but required to perform more test & simulation result for optimization presentation.

best regards,

Parveen

Power management

Power management forum

WEBENCH Tools/TPS54386: TPS54386 simulation support