Hello Experts,
Would you tell a package dimension? Please see the attached file. Customer wants to know that.
Best Regards,
Fujiwara
dimension_KTT0003B(05132020).xlsx
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello Experts,
Would you tell a package dimension? Please see the attached file. Customer wants to know that.
Best Regards,
Fujiwara
dimension_KTT0003B(05132020).xlsx
Hi Fujiwara-san,
Your request has been received, and I am checking with the team to see if we have an updated drawing for this device. It may take 2-3 business days for me to get back to you.
Regards,
Jason
Hi Fujiwara-san,
This is to let you know, I am still trying to get this information for you and it will take some additional time.
Regards,
Jason
Hi Fujiwara-san,
Please see the latest revision of this footprint. KTT0003B_4215105.pdf
Regards,
Jason Song
Hi Jason,
Thanks for update. Customer wants to get your answer as much as possible. Please keep in inform a progress.
Best Regards,
Fujiwara
Hi Fujiwara-san,
The previously shared file is different than the original one, and I have updated the drawing to the latest revision and this revision does have the typical numbers.
Please download the PDF file attached here.
Regards,
Jason
Hi Jason-san,
Thank you for providing a new file. Do you have a typical value for exposed thermal pad dimension? (portion of 6.6mm(min).) It is ok by a design value. Customer wants to know it. Are the dimension of a current shipping devices based on new pdf file as you are sent it?
Best Regards,
Fujiwara
Hi Jason-san,
Also, do you have a plan to revise the package dimension information of datasheet base on new package dimension? If so, when you will revise a datasheet?
Best Regards,
Fujiwara
Hi Fujiwara-san,
I actually worked with the team to have a new revision with the latest KTT drawing added to the datasheet yesterday, and it should be up in the next day or two. Please let me know if you are not seeing the change by Friday.
Regards,
Jason Song
Hi Fujiwara-san,
This is to confirm the latest drawing has been updated to the datasheet.
Regards,
Jason